Zhejiang ETONE Precision Machine Co.,Ltd.

APE Series Close Type Double Crankshaft Precision Steel Frame Press

Straight arm frame,small amount of symmetrical deformation before and after, most suitable forcontinuous precision die machining; Get rid of shortcomings of open throat of C-type press frame, saving the maintenance cost of the die

Product features

• High-rigidity frame to guarantee long-term stabllity

• High-torque pneumatic brake clutch for long life and low maintenance cost; no pollution, low noise, and environmentally friendly.

• High safety, high affinity, multi-function electronic control system.

• Applicable with a variety of automation equipment with easy operation

Technical parameters

Name	Specifications	APE-110		APE-160		APE-200		APE-250
Model		Type S	Type H	Type S	Type H	Type S	Type H	Type S	Type H
Tonnage	Ton	110		160		200		250
Rated tonnage point	mm	6	3	6	3	6	3	7	3
Stroke	mm	180	110	180	130	250	150	280	170
Number of strokes per minute	s.p.m	35-65	50-100	30-55	40-85	20-50	35-70	20-40	30-60
Maximum closed working heigh	mm	400	435	450	400	500	450	550	450
Slider adjustment volume	mm	100		100		120		120
Uoper table size	mm	1400 × 500		1700 × 650		1850 × 750		2300 × 900
Lower table size	mm	1650 × 650		1800 × 760		2200 × 940		2500 × 1000
Side opening	mm	700 × 450		700 × 450		800 × 600		900 × 600
Main motor	Kw	11		15		18		22
Slider adjustment mechanism	Kw×p	1 × 4		1 × 4		2 × 4		2 × 4
Applied air pressure	kg/cm2	6		6		6		6
Press precision		GB(JIS)1class I		GB(JIS)1class I		GB(JIS)1cl ass Class I		GB(JIS)1class I

Name	Specifications	APE-300		APE-400		APE-500		APE-600		APE-800	APE-1000
Model		Type S	Type H	Type S	Type H	Type S	Type H	Type S	Type H	Type S	Type S
Tonnage	Ton	300		400		500		600		800	000
Rated tonnage point	mm	7	3	7	3	9	6	9	6	8	8
Stroke	mm	300	170	300	170	300	180	300	180	300	300
Number of strokes per minute	s.p.m	20-35	30-50	20-30	20-40	18-25	20-30	15-25	20-30	20-30	20-30
Maximum closed working heigh	mm	550	450	550	450	580	480	650	500	600	600
Slider adjustment volume	mm	120		120		120		120		150	150
Uoper table size	mm	2300 × 900		2800 × 000		2900 × 1000		3100 × 1100		3000x1200	3000x1300
Lower table size	mm	2700x1000		3200 × 1000		3300 × 1200		3500 × 1200		3200x1200	3200x1300
Side opening	mm	900 × 600		900 × 600		900 × 700		1000 × 700		1200 × 600	1300 × 600
Main motor	Kw	30		30		45		55		75	90
Slider adjustment mechanism	Kw×p	2 × 4		2 × 4		3 × 4		3 × 4		5x4	5x4
Applied air pressure	kg/cm2	6		6		6		6		6	6
Press precision		GB(JIS)1class I		GB(JIS)1class I		GB(JIS)1class I		GB(JIS)1class		GB(JIS)1class I	GB(JIS)1class I

The Company is constantly working on research and improvement. Therefore, the size and design features specified in this manual are subject to change without notice.